Welcome to Leitax, a site dedicated to make our cameras even more enjoyable. My name is David Llado and I would like to present you with a new lens mount designed to use the Leica-R lenses on your camera.
We are a manufacturer located near Barcelona, in Catalonia, Spain. This project started in my company, when we used a Pentax mount to adapt my camera to a binocular magnifier. I have been a Pentax user for 40 years ( K2, still with me ), and this idea came to my mind, if we could use this mount to adapt more lenses on my Pentax bodies.
After some research, the best candidates were the legacy Leica R-mount
lenses, needless to mention the quality of those lenses, and they can
be obtained easily from ebay and other sites, also Leica owners would
like to use their beloved lenses on modern SLR or DSLR bodies.
Until recently, only Canon and Olympus users could shoot with
Leica-R lenses by means of cheap poor quality adapter. Many of these
adapters present problems, cheaper manufacturing, methods of fit which
loosen over a period of time while many have uneven plating thickness
and fail to achieve a solid locking alignment.
With a Pentax camera and this new bayonet, you get:
-A Leica lens solid on your camera as any Pentax lens.
-Your camera will meter in Av and M mode.
-Focus confirmation in the viewfinder.
-Image stabilization in the newest Pentax bodies.
-Diaphragm ring detents that will "click" like the original bayonet.
I have the K20D, but I think the settings are similar on other models: in the Custom Setting menu, go to "Using aperture ring" and set "permitted". This way, your camera will work and meter in Av mode with adapted lenses.
Of course, the Leica lenses will focus to infinity on Pentax cameras.
After checking many models manufactured for several decades in
different
countries, we found discrepancies at the point they focus to infinity,
therefore we manufacture our bayonets to make sure all Leica-R lenses
will focus on infinity.
Thus, maybe some units will reach even beyond infinity, in this case turning back the focusing ring just half millimeter is enough.
The conversion is fully reversible and will not damage the lens nor the camera. We have already tried all the Leica lenses in the instructions list on the left side.
My email address: info@leitax.comCAUTION! The Leica Zoom lenses with ROM contacts are, in general, not suitable for Pentax conversion. Most of models would need a custom and expensive work. I would recommend to find a non ROM model in case you wish a Leica Zoom lens.
- You can see pictures taken with Leica-R lenses with modern digital cameras at the Leitax group at Flickr.
- We ship to all Paypal supported countries.
- I must ship to the address supplied to me by Paypal. I
cannot ship to any alternative addresses.
- 21% VAT Tax
will be charged by Paypal system to European Union customers
- In case you have a valid intra-community VAT number, please
include it at the Paypal text for the seller, I will refund the Vat Tax
amount via Paypal.
- If you don't receive my email after a purchase, it means
Paypal failed to notify me, this happens rarely. Please email
me if you don't get my confirmation note.
- Customers outside the
European Union may be have to pay import duties.
- If you don't have a Paypal account, it is possible to pay
with a SWIFT Bank Transfer or Western Union transfer.
- Handling & Shipping cost for any quantity of items and to all countries: 10 Euros
- Here is the sales list for Pentax-K mounts, for the other brands, please go to their own pages.
---- We are now offering three variants of the Leica-Pentax bayonet:
1--- The normal variant with Full and Half stops at the aperture ring, is just like the original Leica-R lenses are.This is the
new
improved model of the Leitax Leica-R to Pentax-K mount. With this new model, to focus with the diaphragm wide open is easy, using the Leica-R lenses with Auto-Aperture simulation on the Pentax cameras. Here the instructions. Spare ball bearing included. |
92 Euro |
||||
|
This is the classic
Pentax bayonet for Leitz/Leica -R lenses,
also included a spare small bearing ball, just in case yours get lost. It has five holes instead of six, the sixth one would interfere with the locking pin of the camera mount. NEW model with hard stops for the aperture lever Now in three variants: 1-- Full & Half F-stops stock ok 2-- Only Full F-stops no stock 3-- No F-stops no stock |
68 Euro |
|||
Special classic
Leica-Pentax bayonet edition for Leica-R lenses
with ten
holes. It has the standard five holes plus four additional. Spare ball bearing included. |
75 Euro |
||||
Special Leica-Pentax bayonet for: --Telyt 400/6.8 and 560/6.8 --Telyt 400/5.6 and 560/5.6 --Visoflex 14167 --Leica bellows --Super-Angulon PC 28/2.8 --PA-Curtagon 35/4 |
Out of
Stock 79 Euro |
||||
Special Leica-Pentax mount for: --Apo-Summicron 90/2 --Apo-Summicron 180/2 --1-cam Leica-R lenses --Vario-Elmar 4/35-70 Spare ball bearing included |
Out of
Stock 82 Euro |
||||
Special Pentax mount for several Angenieux for Leica
lenses. (e.g., Zoom 70-210/3.5) Spare bearing ball included |
Out of
Stock 88 Euro |
||||
With certain models, we'll have to manipulate inside the lens, it's not a good place for something metallic. With this plastic tool I don't make any scratches in the Leica or Zeiss lenses. | 3 Euro |
||||
I use this model for all the Phillips screws in the Leica and Zeiss lenses, it is industrial grade quality made by Irazola, and the design is very good, you can push and turn it firmly with the rotary end and the rubber finish. |
9 Euro |
||||
This one is for the small black screws at the Leica's lens rear shroud. Unfortunately, Irazola doesn't produce a size for the bayonet flat screws founded in older Leica lenses. |
5 Euro |
||||
This silicone grease tube is enough for dozens of bayonet replacements. | 1 Euro |
||||
You may need a generic K rear lens cap. | Out of
Stock 2 Euro |
||||
But, if you want the best, I can offer now the OP/TECH
USA Pentax-K cap. -It has a rubber O-Ring that seals the lens from dust and moisture. -The O-ring also forms tight friction, it will avoid losing the cap. -It covers the entire bayonet diameter, providing more protection against blows and scratches. |
Out of
Stock 9 Euro |
||||
If your Leica lens has lost the plastic red hemisphere,
you can glue a new one. Original Leica spare part. |
Out of stock Original Leica Max. two pieces 3 Euro |
||||
Now you can buy an additional bearing ball
and the spring that goes below it. The spring is an original Leica part. The bearing ball has the precise tolerances to work fine on your Leica-R lens. This is important, a regular ball from the hardware store could get stuck into the barrel hole. |
Max., two sets 4 Euro |
||||
You can use the same screws that you have removed from
your Leica-R lens, but In case you have lost one... This is the standard screw for the Leica lens bayonet. Original Leica spare part. (max. order = two pieces) |
Out of
Stock Original Leica Max. two pieces 0.25 Euro |
||||
In case you have lost one... This screw is for the Leica lenses cams. Original Leica spare part. (max. order = two pieces) |
Original
Leica Max. two pieces 0.25 Euro |
||||
In case you have lost one... This is the black shroud screw Original Leica spare part. (max order = two pieces) |
Original
Leica Max. two pieces 0.75 Euro |
||||
If you don't feel confident after reading the
instructions, send
your Leica or Zeiss lens to me. Provided your lens is in the list, we can install a Pentax or Nikon bayonet on it. Notice this price doesn't include the bayonet nor shipping. |
50 Euro |
||||
Extra
shipping cost for faster courier service. I will need your phone number for the courier shipping form. |